Macchine Produzione Fogli Cerei Automatiche

Α fully-fledged machine with the following features:
- Hourly output depending on comb width up to 18 kg per hour with "Dadant" dimension (correspondingly less for narrower comb widths).
- Roller width/length 400 mm, e.g. for a line with the dimensions Deutsch- Normal, Zander or Dadant.
- Standard cell size 5,4 mm (+/- 0,05 mm). Any other cell size is available at extra cost. Should the rollers be damaged, they can be repaired at a reasonable price. No new purchase necessary!
- Wax melting tank with 70 litres capacity (without residual wax quantity) and 3 KW heating capacity, 3-walled with thermal insulation for low power consumption. No danger due to hot surface as with 2-walled tanks.
- Electronically adjustable speed for variable working speed.
- The transport roller can be adjusted separately mechanically for correct tension. This prevents the wax band from tearing or sagging!
- Electronic length adjustment of the length of the sheets with a tolerance of +/- 1 mm.
- Rigid storage table for approx. 15-20 sheets.
- An electrically operated lifting table is available as an optional extra. This allows up to 7 kg of sheets to be stacked.
- Plastic solvent tank with heat exchanger for cooling the machine with connection to cold water. If no cold water connection is available, we offer a cooling unit with approx. 3 KW cooling capacity as accessory at extra costs.
- The machine is almost completely made of stainless steel. Therefore, no rusty iron parts and no corroded aluminium parts. The machine looks like new even after twenty years!
- Very important: High safety and no risk of injury! Of course, the machine fulfils all safety requirements according to CE standard.
- After work, the machine can be folded up and moved on rollers in a few simple steps in order to take up as little space as possible. If the machine is needed, it can be set up quickly.
-Dimensions: Width: 0,69-1,3 m, length folded up: 1,6 m, length assembled: 2,1 m, height (incl. 70 l inlet tank): 1,96 m.
-A special version 25 cm lower by a smaller, 40 l inlet tank is possible without surcharge!

Produce 40-50 kg di fogli cerei artificiali stampati, tagliati ed impilati. Dispone di doppio contenitore riscaldabile per l'alimentazione a cera (base del contenitore e scala non inclusi).

Riceve il foglio cereo piano prodotto dall'unità RE70102A ed una volta stampato, lo taglia alla larghezza (meccanicamente) e lunghezza (digitalmente) preferita per poi impilare i fogli cerei artificiali uno sull'altro. Quando arriva al ciclo di produzione richiesto produce un suono caratteristico. Insieme alla macchina di produzione del foglio cereo arriva ad una potenza massima di 50 kg/ora.

Alimentato da un doppio contenitore (120 kg di cera), produce un foglio pressato di 3 mm di spessore il quale viene raccolto in un rotolo alla fine del processo. Insieme all'unità di faccettatura, taglio ed impilatura arriva ad una potenza massima di 50 kg/ora.