Website: https://app.anel.gr/
ANEL Bee ID for External Use in a Hive
Download the app
Go to the website and register now: https://app.anel.gr/
Lasts up to 3 hours per piece.
Before use, refer to our website by scanning the QR Code for any updates.
To avoid creating a flame-fire hazard when using the Cool Smoke pellets.
Attention
• When combined with Cool Smoke pellets don’t let the smoker stay idle/untouched, without blowing air for more than 15 minutes.
• Shake the device lightly every 5-10 minutes.
• When 50% of the pellets turn black you should replace them.
• When more than 50% of the pellets are black, the extinguishing capacity of the material has decreased and should be replaced.
• Be very careful when emptying the pellets as they are still hot and if they come in contact with flammable materials (for example: dry grass) a fire may occur.
• Before emptying the contents of the smoker make sure they have come to room temperature.
• The device must under no circumstances be left unattended during operation.
• Do not lay the device to the right, left, backwards or more than 45° forwards.
ELECTRIC HEATED VAPORISER/SMOKER ANEL
One device for 3 uses:
1. Vapor
2. Hybrid vapor with the smell of burning wood
3. Conventional smoke
applied to the bees during the beekeepers' visits to the apiary.
The device is designed to work:
1) As a vaporizer combined with the VaporPads ref… AN1040VAP Vapor Producing Material that produces vapor with the common method of heating vaporizing materials.
2) As a hybrid vaporizer combined with the CoolSmoke Hybrid Vaporizing Material ref... AN1040CS a patented formula of ANEL that produces vapor with the smell of burning wood, making it more effective for bees.
3) As a smoker in combination with conventional smoking materials for their safe ignition with the lid of the device closed instead of using a match or lighter.
Both VaporPad and CoolSmoke contain substances that have been used for decades in various forms in beekeeping. Both products have successfully passed extensive tests for effect on bees or residues in honey both in the laboratory and in apiaries.
Both VP and CS contain extinguishing agents that prevent flame development. Their use according to the instructions for use is extremely safe and does not pose a risk of fire when they are used according to the instructions for use of the device.
Even in the use of conventional smoking materials (e.g. pine needles), due to the fact that the ignition of the materials takes place entirely in a closed environment, it becomes safer than conventional smokers.
The device is available in 2 different amperage versions, ANELVPSM-01/3.7/6-ST and ANELVPSM-01/7.4/6-ST. Depending on the use you want to use, consult the table below.
How to choose a battery:
We recommend using the 3.7V for the best safety even during the warm months of summer when fire danger is high. Combine only with the CoolSmoke material. The vapor produce will be on the lighter side. Can also be used to light any other traditional material like a normal smoker.
Use the 7.4V for a lot and thick smoke in combination with the VaporPads for safe use in warm months when fire danger is high or with CoolSmoke for the rest of the months of the year. Can also be used to light any other traditional material like a normal smoker.
Use to initiate combustion of conventional materials:
All batteries can be used to start burning common materials. The higher the Volts (V) the sooner the combustion starts. Indicative times for use with dry pine needles are as follows:
3.7V: 20-60”
7.4V: 10-30”
11.1V: 5-10”
INCLUDES 1 ELECTRIC SMOKER - 1 220V CHARGER - 1 CAR CHARGER - 1 BATTERY.
The photo of the chargers and batteries is indicative and may differ from what you will receive.
It lasts 1 - 1:30 hours depending on its use.
Amazing strength, fit for tough use. With five points for hive body stabilization. With bases of special non-slip material, screwed to the bottom, so that the hives do not slip during transportation by truck and the bases remain attached. Accompanied by very practical transportation-protection doors.
Can be connected with the hive body with four different ways:
1. With adjustable front and rear fasteners.
2. With wire fasteners right and left.
3. Screw-in. With special connectors so that the bottom can be screwed permanently on the hive body thus transforming into a brood chamber with non-atachable bottom board.
4. With attachment straps which can be removed after beehive placement to discourage thieves.
What are the advantages of a ventilated plastic bottom board?
• Bees can keep the hive clean very easily.
• When applying treatments for varroa the parasites fall down under the hive thus treating the hive more effectively.
• Ventilation means less humidity and less humidity means fewer chances that nozema will spread in the hive.
Queen Excluder Injected with Two Entrances Plastic PP ANEL
Item Description: Queen Excluder with Two Entrances protected from wasps, Perimetric frame, Partitions for combination with vertical dividers for multiple colonies or other uses.
Properties - Uses:
It is used like all queen excluders interposed between the brood-chamber and the honey-chambers.
The doors open and close at will and you can have them applied to the hives during transport.
The perimetric frame makes it possible to use it as a double queen excluder by placing a single excluder on top of it.
Internal partitions offer a guide to be combined with vertical dividers to confine the queen even within a frame in order to:
· Treat (e.g. for Varroa) in a controlled brood environment.
· Limit the brood before flowering.
· Multiply colonies.
· Combine it with a common excluder in the upper part to turn into a double excluder. So, you have one queen up and one on the bottom.
· Combine it with a common excluder for multiplication: In this case you do the same thing as the vertical divider, but you put the entrances of the excluder facing the opposite side from the doors of the brood-chamber.
Perhaps the best branding iron available worldwide. A product designed and manufactured for safe, efficient and ergonomic use. The heated area works like an oven directing the flame on the digits. At the same time, it prevents heat radiation from returning to the operator's hands.
Minimum digits needed: 10
Technical Characteristics
Dimensions: 14 digits model: 39x23x4cm – 12 digits model: 39x20x4cm
Weight: 1.4 - 1.1 kg (without digits)
Type of LPG required: LPG PROPANE
LPG requirements: 14 digits model: 600g/H - 12 digits model: 400g/Η
LPG pressure requirements: 3Bar
Recommended type of pressure regulator: (ref:PH10503B) inlet (Pd+1) 16Bar - outlet Pd= 3Bar / 18Kg/Η
ATTENTION!!! The product operates ONLY with the appropriate pressure regulator and the required type of LPG. Using LPG or/and a pressure regulator out of specifications will cause out of limits temperatures in the digits (lower or higher), resulting in their permanent damage and eventually setting the device and the digits OUT OF WARRANTY.
Beekeeping Practices, Tips & Methods / Beekeeping for Beginners.
We inspect a beehive for the first time after practices we followed before winter and we observe the progress of our bees.
...Inspecting our bees for autumn pollen, very important for their overwintering.
...🌟 Dear customers,
As we approach the Christmas season, we would like to update you on the operating hours of our stores.
We are happy to invite you to visit us at our booth A38, at the 48th Apimondia, in Santiago, Chile, 4th to 8th of September!
...From all of us at ANEL, we wish you happy holidays and a successful new beekeeping year!
We are operating normally until the end of the year and we will be closed 02 - 08/01/2023. We will back in off...