Close
Search
Filters
SKU: AN5167
Be the first to review this product
  • *
Dimensions (Package): 52.00 x 44.00 x 14.00 cm
Dimensions (Item): Ø 19.30 x 00.70 cm
Weight: 42.00 g
Items / Pallete: 4400
Items / Package: 110
€0.72 excl tax
€0.89 incl tax
To install the disk, you must open a 30-40mm hole on the beehive side. The disk is installed on the hive by passing a screw through the disc center. It features 4 positions/“settings”: (i) completely closed, (ii) completely open, (iii) bee queen excluder and (iv) protection from hornets. TIP: Can be used for multiplication and merging of colonies. Making a 4 cm hole and installing two discs on a wooden sheet with same dimensions as the beehive, allows you, by changing disc “settings” to use the structure for queen separation (exclusion) and merging of colonies: first leave the discs at “completely closed” position with ventilation for 1-2 days, allowing the transfer of smell between the two colonies; then turn both discs to “queen excluder” position, thus allowing communication of the bees, while the queens keep giving birth without being able to contact/harm each other (since the discs/excluders are placed in between the two different floors created by the installation of the wood/disc structure).
To install the disk, you must open a 30-40mm hole on the beehive side. The disk is installed on the hive by passing a screw through the disc center. It features 4 positions/“settings”: (i) completely closed, (ii) completely open, (iii) bee queen excluder and (iv) protection from hornets. TIP: Can be used for multiplication and merging of colonies. Making a 4 cm hole and installing two discs on a wooden sheet with same dimensions as the beehive, allows you, by changing disc “settings” to use the structure for queen separation (exclusion) and merging of colonies: first leave the discs at “completely closed” position with ventilation for 1-2 days, allowing the transfer of smell between the two colonies; then turn both discs to “queen excluder” position, thus allowing communication of the bees, while the queens keep giving birth without being able to contact/harm each other (since the discs/excluders are placed in between the two different floors created by the installation of the wood/disc structure).
Rate this product
  • Only registered users can write reviews
Rating
  • Bad
  • Excellent
Customers who bought this item also bought

Ventilation and/or Feeding Plug ANEL (built- in screen) New Type

SKU: AN5167V
Equip your hives with new ventilation and feeding caps. A simple idea that minimizes feeding time and keeps the interior of the hive cool and dry. Their screen does not allow the bees to pass through. Designed for ANEL caps and hives but you can screw them in any type of hive after opening a 4cm diameter hole. In very cold weather you can shut them with their special lids. Built from very durable material.
€0.68 excl tax
€0.84 incl tax

Frame Foundation for Deep Hive Body H23,1mm (~9 1/8'' Langstroth Hoffman) All Plastic ANEL PS Unwaxed cell d5.6mm

SKU: AN51661PS
A plastic frame with integrated plastic foundation with perfectly printed hexagons (5,6 mm). No wiring or riveting necessary. Resistant to wax moths. It does not get unfastened or loose and does not “sag”. You can use higher speeds in the honey extractor without destroying the comb (especially useful for thick honey types such as fir). All ANEL plastic frames are available waxed or unwaxed. If you want to wax ANEL frames yourself you can either dip them in molten wax (temperature 60-70⁰C) or wax them using a roll dipped into molten wax. TIP: The ANEL frames can be disinfected in a solution of caustic potash 5% at 80⁰C.
€1.57 excl tax
€1.95 incl tax

Entrance, Ventilation and Feeding Hybrid Plug ANEL

SKU: AN51672EV
An innovative new ANEL Product! This is the New Hybrid ANEL Entrance, Ventilation & Feeding Plug.
Multiple uses:
• Ventilation screen and/or feeding plug.
• If you rotate the mechanism, with a simple CLICK, it turns into a small safety entrance for bees.
• Remove the mechanism altogether and you can use it as big entrance or a feeding plug.
To apply it in your beehive you will need:
• A drill with a 43mm hole saw
• Four 3,5 x 13mm screws
• A Polyurethane Sealant
We apply the PU sealant in the inner surface of the plug. We follow the same steps for a wooden beehive. The new ANEL plug is of larger diameter than the previous model. To replace the older model with the new plug you will need a 43mm cylindrical drill. The new plug comes with a hinge and opens sideways. It is advised to open it with a hive tool while holding it from the top, or by hand using our thumbnails. Due to opening sideways the plug cannot be closed by the wind. Position the lid in 90 degrees from the body to remove it. This is very useful because a potential thief will need special equipment.
The new ANEL Entrance, Ventilation & Feeding Plug can be used in many ways. As a feeding plug on the top cover, as ventilation or entrance in the frontside / backside of the top cover, as a small entrance on the side of the beehive protecting the bees from potential enemies, as ventilation on the sides, or as a big hive entrance. An alternative beehive entrance is very important. In case of plunder we leave the small entrance open so that only few bees can come in and the intruders can be handled. We close the front doors and lead the bees on the alternative entrance which the already know and use. For even more drastic measures if we want to prevent plunder, we just seal the plugs on the top cover.
Some other examples of how to use the New ANEL Entrance, Ventilation & Feeding Plug. During spring if we want to use a second hive body, it is very useful to have a second entrance in the upper hive body for beehive decongestion. A second entrance also helps bees collect honey easier, especially if we use a queen excluder.
Also, during spring if we have a ten-frame beehive that is in the process of swarming, we can divide it and have two independent swarms. Half of the frames can be transferred to a new hive body. We use a fabric cover to prevent pheromones from mixing and a queen excluder to keep the two queens away from each other. We place the new hive body on top. The original swarm uses the front entrance, while the new one uses the entrance on the back.
If we want to have 2 swarms in a single beehive, we can provide them two independent entrances from both sides. We keep them divided in two with the help of the ANEL vertical beehive divider. We can also have 3 swarms in the same beehive with the use of 2 dividers. This swarm uses the entrance on the right, this one uses the entrance on the left and the middle swarm uses the entrance on the back. In that case we will need a top feeder to keep them separated and feed them independently with syrup or candy.
€0.48 excl tax
€0.60 incl tax