Uncapping knife with steam boiler

The low-budget solution for the the roof feeder. The only thing that changes is the durability of the plastic when exposed to the sun. If you don't expose the feeders in the sun you will have no problem. The professional roof feeder, the ultimate tool for bee feeding, offers the following: • Provides insulation of the inside of the hive in cold and hot weather. • When you fill the feeder, you do not disturb the bees, since they are completely isolated behind the divides. • Whatever the inclination of your hive might be the bees can consume all the syrup. • Suitable for liquid (syrup) and solid (bee candy) feed. You will never again have the leaks experienced with wooden feeders. • Fits into the lid and does not alter the hive height. • Has vent holes to allow humidity to escape the hive. • Requires absolutely no maintenance. Built from very durable material

Another tool for installing rivets. Screw the device on a flat surface, place the rivet on the protruding piston, place the frame with the hole in the center of the piston, lower the lever and the rivet will get into the hole of the frame. Simple as that!

Placed in the holes of the frame through which the wire passes so that the wood is not damaged. Due to stretching and the weight of the honeycomb the wire tends to penetrate into the wood; thus, the wire loosens and the honeycomb is destroyed.