Honey Scrapper

The NEW ANEL propolis collection screen bears two holes that you can choose to open if you want to put solid food on top (bee candy). Thus, you will be able to feed the bees and at the same time they will not stop the collection of propolis. The sides of the holes also lift the center of the screen up so it does not bend in the center and the bees can fill all the screen evenly.
Propolis is a very promising product with a very good price, which may contribute to your income without requiring much effort or time. The propolis collection screens are placed on the hive top floor, below the cover.
There should be some space left above the propolis collection screen and the hive cover so that air current is generated from which the bees will try to protect themselves by filling the screen with propolis. To keep the required gap you can use the two spacers attached to the side of the screen which are foldable. Propolis can be extracted from the screens after you place it in the freezer for 5 minutes and then shake or rub the propolis with a piece of wood or your hand.
The screen can collect 60 to 80gr when full within 10-15 days. Usually applied in spring and autumn - a good year can give you around 400gr per beehive. All these results can vary depending on the race of the bees, the beehive, the fauna and the time of year.
Screen dimensions: 420x510mm - can be cut to any smaller dimensions you wish!
Gaps dimensions: 20,5x2,5mm
Weight: 0,264kg
Material: Polyethylene (PE), Food Grade

The transformer changes the common 220V household current to 14V. Simply place the terminals at the ends of the wire, and the wire will heat up automatically. The wax will be attached on the wire and you simply have to apply it with your hand. • TIP: It would be helpful to place the frame horizontally, over a flat non-flammable plate smaller in size than the inside of the frame, so that it is in contact with the wire. Thus, the artificial sheet will not be damaged due to excessive heating (it could melt and tear), and you can apply enough pressure with your hand! The transformer is not waterproof. It should not be in contact with water.

A very useful tool during harvesting. Lifting the frames from the hive becomes an easy job. In addition the model comes with an incorporated hive tool which may be used for hive inspection.