Wishlist

Shopping cart

Filters

Personal menu

Beehive Top Cover ANEL with Feeding Lid and 4 Ventilation Plugs Langstroth

Previous productBeehive Top Cover ANEL with...

Next
productBeehive Top Cover ANEL with...

Product image #0

Product image #1

Product image #2

Product image #3

SKU: AN2600V4FST

Be the first to review this product

Select Color: *

Dimensions (Package): 56.00 x 45.00 x 68.00 cm

Dimensions (Item): 53,00 x 43,00 x 09,00 cm

Weight: 2.20 Kg

Items / Pallete: 100

Items / Package: 7

€13.65 excl tax

€16.93 incl tax

Qty:

A modern tool with many advantages... • Double walled with the gap filled with polyurethane foam insulation. • With 4 ventilation plugs • With feeding plug on top • Unmatched impact strength and load support. • Anti-slip surface to prevent hives from slipping during transportation. • 4 points of attachment at the front, back and the sides (adjustable or wire type). • Resistant to chemicals (caustic potash, oxalic acid, formic acid, bleach etc.). If you use ventilated bottom boards the hive has adequate ventilation even without ventilation caps. Just think of the wild hives settling on the top part of closed spaces, like tree hollows.

Overview
Videos
Manuals & Attachments
Ratings
Contact Us

Rate this product

Only registered users can write reviews

Rating

Bad
1 2 3 4 5
Excellent

Your name

Your email

Enquiry

Combines with

Plastic Beehive Bottom Board ANEL Hybrid Langstroth Ventilated (Anti-Varroa) (NO doors included)

SKU: AN5100V

What are the advantages of a ventilated plastic bottom board?
• Bees can keep the hive clean very easily.
• When applying treatments for varroa the parasites fall down under the hive thus treating the hive more effectively.
• Ventilation means less humidity and less humidity means fewer chances that nozema will spread in the hive.

Amazing strength, fit for tough use. With five points for hive body stabilization. With bases of special non-slip material, screwed to the bottom, so that the hives do not slip during transportation by truck and the bases remain attached. Accompanied by very practical transportation-protection doors.

Can be connected with the hive body with four different ways:
1. With adjustable front and rear fasteners.
2. With wire fasteners right and left.
3. Screw-in. With special connectors so that the bottom can be screwed permanently on the hive body thus transforming into a brood chamber with non-atachable bottom board.
4. With attachment straps which can be removed after beehive placement to discourage thieves.

€5.88 excl tax
€7.29 incl tax

Plastic Beehive Bottom Board ANEL Hybrid Langstroth Classic (Closed) (NO doors included)

SKU: AN51000

€5.88 excl tax
€7.29 incl tax

Plastic Beehive Bottom Board ANEL Langstroth CONFIGURATOR: Choose type, color and entrances

SKU: AN5100CNF

Syrup Feeding Pump 12V with Pumping capacity 18.5 lt/pm

SKU: EV65401

Easy and fast feeding of syrup to the bees. Forget spilled syrups and carrying buckets. The 12 volt high voltage syrup/water pump is equipped with an automatic pressure switch that opens and closes automatically when you open and close the hose nozzle.

Technical characteristics:
• Ability to pump 18.5 lt / pm
• Maximum flow rate: 7.8 (4.5GPM)
• Maximum pressure: 40PSI
• Motor voltage: 12V DC
• Automatic suction
• Pressure switch protection: With fully automatic ON/OFF control

€95.00 excl tax
€117.80 incl tax

Syrup Feeding Pump 12V SET With Reel

SKU: AN65401-ST

Easy and fast feeding of syrup to the bees. Forget spilled syrups and carrying buckets. The 12 volt high voltage syrup/water pump is equipped with an automatic pressure switch that opens and closes automatically when you open and close the hose nozzle mounted on a reel. (Same or similar with the photo)

Technical characteristics:
• Ability to pump 18.5 lt / pm
• Maximum flow rate: 7.8 (4.5GPM)
• Maximum pressure: 40PSI
• Motor voltage: 12V DC
• Automatic suction
• Pressure switch protection: With fully automatic ON/OFF control

The set includes:
• Syrup pump 12V
• Hose Nozzle Φ20
• Hose 3/4 25m
• Spool for rubber
• Connection adapters
• 2 Fittings 1/2 + 3/4
• 4 Quick Links 3/4

€283.68 excl tax
€351.76 incl tax

Syrup Feeding Pump 12V SET With Reel And Wheels

SKU: AN65402-ST

Easy and fast feeding of syrup to the bees. Forget spilled syrups and carrying buckets. The 12 volt high voltage syrup/water pump is equipped with an automatic pressure switch that opens and closes automatically when you open and close the hose nozzle mounted on a reel with wheels. (Same or similar with the photo)

Technical characteristics:
• Ability to pump 18.5 lt / pm
• Maximum flow rate: 7.8 (4.5GPM)
• Maximum pressure: 40PSI
• Motor voltage: 12V DC
• Automatic suction
• Pressure switch protection: With fully automatic ON/OFF control

The set includes:
• Syrup pump 12V
• Hose Nozzle Φ20
• Hose 3/4 25m
• Spool for rubber
• Connection adapters
• 2 Fittings 1/2 + 3/4
• 4 Quick Links 3/4

€294.68 excl tax
€365.40 incl tax

Customers who bought this item also bought

Frame Foundation for Deep Hive Body H23,1mm (~9 1/8'' Langstroth Hoffman) All Plastic ANEL PS Unwaxed cell d5.6mm

SKU: AN51661PS

A plastic frame with integrated plastic foundation with perfectly printed hexagons (5,6 mm). No wiring or riveting necessary. Resistant to wax moths. It does not get unfastened or loose and does not “sag”. You can use higher speeds in the honey extractor without destroying the comb (especially useful for thick honey types such as fir). All ANEL plastic frames are available waxed or unwaxed. If you want to wax ANEL frames yourself you can either dip them in molten wax (temperature 60-70⁰C) or wax them using a roll dipped into molten wax. TIP: The ANEL frames can be disinfected in a solution of caustic potash 5% at 80⁰C.

€1.57 excl tax
€1.95 incl tax

Foundation Plastic PS ANEL 405*278mm (or Cut Smaller) Dadant cell d5.6 Unwaxed

SKU: AN51751UPS

*CAN BE CUT TO ANY SMALLER DIMENSION YOU WISH - CONTACT US! ANEL plastic honeycomb foundation, printed with absolute hexagons (5.6 mm). There is no need for riveting and applying wire on the frames anymore! They can be applied on normal wooden frames that have a slit on the upper and lower part. You can purchase these frames from us, otherwise, with the right tools and very little effort, shape your own existing frames so they can accept the plastic honeycomb foundations.
ANEL plastic honeycomb foundations and frames will not be affected by wax moth. They will remain sturdy and you can use higher speeds in the honey extractor without destroying the honeycomb. Particularly useful for tight honey types. All ANEL plastic honeycomb foundations can come unwaxed or waxed. If you want to wax the foundations yourself you can either dip them in molten wax at a temperature of 60-70ºC or wax them with the help of a roll that you dive into the wax. Made of food-grade plastic. TIP: The ANEL plastic honeycomb foundation can be disinfected in 5% caustic potash solution at 80ºC..

€1.39 excl tax
€1.72 incl tax

Beehive Fasteners Adjustable

SKU: PZ51810

Reinforced adjustable hive fasteners The classic adjustable hive fasteners. Adjustable so they can snap in different heights (e.g. when introducing a partition plate between two levels). They are certainly the most popular fasteners in Greece. Galvanized to avoid rusting.

€0.83 excl tax
€1.03 incl tax