Syrup Feeding Pump 12V SET With Reel And Wheels

Easy and fast feeding of syrup to the bees. Forget spilled syrups and carrying buckets. The 12 volt high voltage syrup/water pump is equipped with an automatic pressure switch that opens and closes automatically when you open and close the hose nozzle mounted on a reel. (Same or similar with the photo)

Technical characteristics:
• Ability to pump 18.5 lt / pm
• Maximum flow rate: 7.8 (4.5GPM)
• Maximum pressure: 40PSI
• Motor voltage: 12V DC
• Automatic suction
• Pressure switch protection: With fully automatic ON/OFF control

The set includes:
• Syrup pump 12V
• Hose Nozzle Φ20
• Hose 3/4 25m
• Spool for rubber
• Connection adapters
• 2 Fittings 1/2 + 3/4
• 4 Quick Links 3/4

The low-budget solution for the the roof feeder. The only thing that changes is the durability of the plastic when exposed to the sun. If you don't expose the feeders in the sun you will have no problem. The professional roof feeder, the ultimate tool for bee feeding, offers the following: • Provides insulation of the inside of the hive in cold and hot weather. • When you fill the feeder, you do not disturb the bees, since they are completely isolated behind the divides. • Whatever the inclination of your hive might be the bees can consume all the syrup. • Suitable for liquid (syrup) and solid (bee candy) feed. You will never again have the leaks experienced with wooden feeders. • Fits into the lid and does not alter the hive height. • Has vent holes to allow humidity to escape the hive. • Requires absolutely no maintenance. Built from very durable material

The professional roof feeder. The ultimate tool for bee feeding. • Provides insulation of the inside of the hive in cold and hot weather. • When you fill the feeder, you do not disturb the bees, since they are completely isolated behind the divides. • Whatever the inclination of your hive might be the bees can consume all the syrup. • Suitable for liquid (syrup) and solid (bee candy) feed. You will never again have the leaks experienced with wooden feeders. • Fits into the lid and does not alter the hive height. • Has vent holes to allow humidity to escape the hive. • Requires absolutely no maintenance. Built from very durable material.

The transparent model of the professional top feeder allows you to see under the feeder and inspect the condition of the bees. The professional roof feeder, the ultimate tool for bee feeding, offers you the following: • Provides insulation of the inside of the hive in cold and hot weather. • When you fill the feeder, you do not disturb the bees, since they are completely isolated behind the divides. • Whatever the inclination of your hive might be the bees can consume all the syrup. • Suitable for liquid (syrup) and solid (bee candy) feed. You will never again have the leaks experienced with wooden feeders. • Fits into the lid and does not alter the hive height. • Has vent holes to allow humidity to escape the hive. • Requires absolutely no maintenance. Built from very durable material.

A modern tool with many advantages... • Double walled with the gap filled with polyurethane foam insulation. • With 4 ventilation plugs • With feeding plug on top • Unmatched impact strength and load support. • Anti-slip surface to prevent hives from slipping during transportation. • 4 points of attachment at the front, back and the sides (adjustable or wire type). • Resistant to chemicals (caustic potash, oxalic acid, formic acid, bleach etc.). If you use ventilated bottom boards the hive has adequate ventilation even without ventilation caps. Just think of the wild hives settling on the top part of closed spaces, like tree hollows.

Top feeder with two compartments for feeding both liquid and solid food at the same time.
Both compartments can be used for all types of food due to the holes and special plugs that come with the feeder. Thus, you can choose to feed your bees with pollen substitute together with sugar-water or bee candy at the same time. Or choose to fill both compartments with only sugar-water. The compartments can take 4 and 3 kg of sugar-water respectively.
Moreover, the feeder is divided inside and below in 6 independent parts so if you have more than one swarms in the same hive you could feed them all independently without them coming in contact. This is ideal for queen breeders and creation of new bee swarms during spring.
• Provides insulation of the inside of the hive in cold and hot weather.
• When you fill the feeder, you do not disturb the bees, since they are completely isolated behind the divides and you don’t come in contact with them. Ideal for fast feeding.
• Fits into the hive cover and alters the hive height only by a few mms.
• Has vent holes to allow humidity to escape the hive.
• Requires absolutely no maintenance.
• Built from high quality food-grade polypropylene.